ACCEPTED PAPERS - CATEGORY B – STANDBY / POSTERThese papers are standby for oral presentations in case papers are withdrawn from an appropriate session. |
1.1 - Aircraft Design and Integrated System (Basics and Theory) |
|
ICAS2022-2.8ST: V. Gollnick¹, B. Muth, TU Braunschweig, Germany; T. Weber¹, K. Scheibe, HAW Hamburg, Germany; M. Grünewald, FH Aachen, Germany; E. Aydin¹; ¹TU Hamburg, Germany CONCEPTUAL DESIGN OF FUTURE MILITARY AIR SYSTEMS - AN EDUCATIONAL APPROACH |
1.2 - Aircraft Design and Integrated System (Applications) |
|
ICAS2022-3.1ST: X. Zhao¹, C. Xisto¹, S.-H. Peng, Chalmers University of Technology/FOI, Sweden; ¹Chalmers University of Technology, Sweden DEVELOPMENT OF AN AERODYNAMIC ANALYSIS TOOL FOR BOUNDARY LAYER INGESTION CONCEPT DESIGN |
|
ICAS2022-3.1ST: P.D. Bravo-Mosquera¹, J.P. Eguea¹, H.D. Cerón-Muñoz¹, F.M. Catalano¹; ¹University of São Paulo, Brazil EXPERIMENTAL INVESTIGATION OF A NEXT-GENERATION AIRLINER WITH BOUNDARY LAYER INGESTION |
|
ICAS2022-3.5ST: S. Horinouchi, SuperSonic Jet Planning Inc., Japan CONCEPT DESIGN OF A LOW BOOM SSBJ TO SATISFY SOCIAL ACCEPTANCE |
|
ICAS2022-3.4ST: Y.-L. Huang¹, D.-Q. Huang¹, W. Du¹, J. Liu, Beihang University, China; ¹AVIC CHENGDU AIRCRAFT INDUSTRIAL(GROUP) CO.LTD, China RESEARCH ON THE SELECTION METHOD OF TYPICAL RCS BENCHMARK BASED ON AHP |
3.1 - Aerodynamics – CFD Methods and Validation |
|
ICAS2022-4.7ST: D. Mo¹, H. Lin¹, C. Liang¹, S. Shang¹, J. Xia, Aero Engine Academy of China, China; Y. Liu¹; ¹AECC Shenyang Engine Research Institute, China TWO-PHASE NUMERICAL SIMULATION INVESTIGATION ON THE EFFECTS OF TURBULENCE MODEL AND OPERATING CONDITIONS ON THE CENTRIFUGAL NOZZLE PERFROMANCE |
3.2 - Experimental Aerodynamics |
|
ICAS2022-6.11ST: C. Bu¹, Z. Ma¹, Y. Zhang¹, L. Li¹; ¹AVIC Aerodynamics Research Institute, China DEVELOPMENT AND VERIFICATION OF OSCILLATING BLADE GUST GENERATOR IN LOW-SPEED WIND TUNNEL |
4.1 - Aerospace Grade Materials, Structural Analysis, Fatigue and Damage Tolerance |
|
ICAS2022-7.10ST: H. El Fazani¹, J. Coil¹, J. Laliberté¹; ¹Carleton University , Canada FATIGUE CRACK PROPAGATION IN ADDITIVELY MANUFACTURED POLYMER PARTS |
|
ICAS2022-6.9ST: X. Jia¹, H. Du¹, L. Zhang¹, X. Zhang¹, Z. Zhong¹; ¹AVIC The first Aircraft Institute, China ELECTROMAGNETIC INTERFERENCE SHIELDING EFFECTIVENESS OF THE THIN CARBON NANOFIBERS/ SILICON CARBIDE FABRICS COMPOSITES |
4.2 - Aerostructures Design, Structural Dynamics, Aeroelasticity |
|
ICAS2022-8.2ST: J. Lübker, Germany SOME EXPERIMENTAL RESULTS ON DYNAMIC AEROELASTICITY OF PLATES AND SHELLS IN SUBSONIC AND SUPERSONIC FLOW. |
5 - Propulsion |
|
ICAS2022-8.9ST: Y. Shang, COMAC, China DESIGN OF AERO-ENGINE FADEC POWER SUPPLY CONTROL SYSTEM BASED ON FORWARD DESIGN |
|
ICAS2022-9.10ST: N.-X. Qiao¹, T.-L. Ma¹, X.-S. Wang¹, J.-C. Fu¹; ¹Beihang University, China DESIGN AND EFFICIENCY ANALYSIS OF EVTOL CONTRA-ROTATING PROPELER |
|
ICAS2022-9.10ST: Y. Chen¹, Z. Zhang¹, A. Wang¹; ¹AECC Shenyang Engine Institute, China EXPERIMENTAL STUDY OF FLAT BAFFLE INLET TOTAL-PRESSURE DISTORTION IN A THREE-STAGE FAN |
|
ICAS2022-9.6ST: J.-Z. Fan¹, Q.-Z. Yang¹, X.-B. Du¹, H.-Q. Yang¹, Y.-B. He¹, Y.-Q. Shi¹; ¹Northwestern Polytechnical University, China EFFECT OF TAILCONE SHAPE ON HOT STREAK PHENOMENA AND INFRARED SIGNATURE OF SERPENTINE NOZZLE WITH AFT DECK |
|
ICAS2022-ST: Z.-B. Zhang¹, Y.-H. Zhang¹, Y.-H. Chen¹; ¹Shenyang Engine Research Institute, China EXPERIMENTAL STUDY ON THE EFFECT OF INTERSTAGE BLEEDING ON THE PERFORMANCE OF FULL-SCALE MULTISTAGE AXIAL COMPRESSOR |
|
ICAS2022-9.6ST: V.T. Silva¹, A. Venkatesh¹, M. Lejon ², A. Lundbladh², C. Xisto¹; ¹Chalmers University of Technology, Sweden ;²GKN Aerospace, Sweden MULTIPOINT AERODYNAMIC DESIGN OF A NACELLE FOR AN ELECTRIC FAN |
|
ICAS2022-8.9ST: A. Sato¹, R. Yasuda¹, M. Harada¹, S. Shibasaki¹, H. Moriai¹; ¹Kanazawa Institute of Technology, Japan STUDY ON THE APPLICATION OF EMULSIFIED FUEL IN SMALL JET ENGINES |
7 - Systems, Subsystems and Equipment |
|
ICAS2022-13.9ST: R.K. Rangel¹, V.A. Rodrigues¹, A.L. Maitelli¹, T.M. de Souza¹; ¹IBRV - Institute of Research & Development, Brazil HYDRO ENVIRONMENTAL AND ELECTRICAL ASSETS MAPPING TOOL USING SWARMS AND MACHINE LEARNING, UAV & USV |
|
ICAS2022-12.11ST: X. Guo¹, Q. Yang¹, H. Zheng¹, W. Dong¹; ¹Shanghai Jiaotong University, China EFFECTS OF ANISOTROPIC THERMAL CONDUCTIVITY OF COMPOSITE SHIELD ON THE ELECTROTHERMAL ANTI-ICING SYSTEMS |
9 - Air Transport System Efficiency |
|
ICAS2022-13.10ST: R. Camilleri¹, A. Batra¹; ¹Institute of Aerospace Technologies (IAT), University of Malta, Malta KINETIC ENERGY RECOVERY FROM A LANDING AIRCRAFT: ENERGY ANALYSIS, ENVIRONMENTAL AND ECONOMIC PROSPECTS |
10 - Safety and Security |
|
ICAS2022-13.4ST: L. Meyer¹, C. Bjursten Carlsson¹, Å. Svensson¹, M. Peukert¹, L. Danielson, SDATS, Sweden; B. Josefsson¹; ¹LFV, Sweden STRESSING SAFETY ASSESSMENT METHODS BY HIGHER LEVELS OF AUTOMATION |
|
ICAS2022-13.3ST: A. Devta¹, I.C. Metz, DLR, Germany; S.F. Armanini¹; ¹Technical University of Munich, Germany EVALUATION AND QUANTIFICATION OF THE POTENTIAL CONSEQUENCES OF BIRD STRIKES IN URBAN AIR MOBILITY |
|
ICAS2022-13.4ST: R.G. Cortes¹, E. Villani¹, M.M. Cardoso Júnior¹; ¹Aeronautics Institute of Technology, Brazil EXPLORATORY STUDY OF MENTAL WORKLOAD IN HELICOPTER AIR-TO-GROUND ROCKET FIRING |
11 - Operations and Sustainment |
|
ICAS2022-14.1ST: M.P.P. Osund-Ireland¹, A.J. Powell¹, C.J. Ireland¹; ¹susteer AB, Sweden A GLOBAL APPROACH TO ASSESSING THE CLIMATE RESILIENCE OF AIRPORTS |